V-by-One HS is developed by THine to support higher frame rates and resolutions of advance flat panel display technology. The unique variable speed technology, which data rate from 600Mbps to 4Gbps, effectively meets the requirements of different pixel rates. The equalizer technology from THine achieves high video signal quality at the same time reducing total cost by enabling the use of low cost connectors, cables and reducing components for EMI control.
V-by-One HS using Clock and Data Recovery (CDR) technology solves skew problems and eliminates the need of fixed frequency signal such as clock, which results in low EMI noises. V-by-One HS also helps to reduce the number of cable by exist THine SerDes technology, it achieves 4Gbps transmission per pair of cable.
THCV217 and THCV218 are designed to support high speed video signal transmission between host and display. The two high speed data lanes with maximum serial data rate 3.4Gbps/lane support video up to 1080p/60Hz/30bits or 4k2k/30Hz/16bits colors. It suitable for applications like TV, surveillance camera, multifunction printer, projector and medical equipment.
Color depth selectable: 24(8×3)/32(10×3)bit
Single-in/Single-out, Single-in/Dual-out and Dual-in/Dual-out selectable for THCV217
Single-in/Single-out, Dual-in/Single-out and Dual-in/Dual-out selectable for THCV218
AC coupling for high speed lines
CORE 1.8V, CMOS IO 3.3V
Wide frequency range from 20MHz to 85MHz, or 40MHz to 170MHz
Spread Spectrum Clocking tolerant up to 30kHz±5% (center spread)
Operating temperature: -20 to 85°C
THCV217 is using TFBGA105 packaging, THCV218 is using TFBGA145 packaging
Need more information about our V by One HS solution? Drop us an email and we will come back to you.
Using Phison NAND Flash controller IC PS8210, C-MSDM004G1-T015N2D10-K10 can be used to replace similar microSD card C-MSDM004G1-T015N2D39-K10. This is a 4GB MLC microSD card with class 10 speed, targeting for Industrial reliable usage.
To order this microSD card with technical support, contact us at email@example.com for further information.
Kogen Singapore is currently promoting Roboden the Elastic Electrical Wire in South East Asia countries. The wire is stretchable, bendable and twistable. It is made for factory automation machine like Robot with moving arm or platform.
By using Roboden elastic electrical wire, there is lesser risk for the cable to be snagged by an unexpected object when the machine is moving. Furthermore, Roboden wire helps automation machine save a lot of space, which is needed when the cable is unstretchable.
Roboden wire extendibility is up to 140%, and with more than 3 million times bend-ability, it is 30 times more endurable compare with normal non-elastic cable with only 10 thousand times bend-ability before the outer cover breaks.
This elastic electrical wire is able to transmit different types of signal like power, video, audio and control signal. It provides a good open eye pattern even after stretching, allowing it to be used for industrial usage in factory automation or consumer products.
New target application like Bluetooth earphone allowing the cable of the earphone to fit nicely with the wearer head. Irregardless whether the wearer is moving or running, no slacking of wire affecting the wearer.
The other application is Power Adapter. You may notice that most of the current Power Adapter in the market have their cable get loosen in the suitcase or luggage when travelling. By using Roboden elastic electrical wire, the wire can be tightly tied onto the power adapter.
Want to know more about Roboden the elastic electrical wire? Feel free to contact us at firstname.lastname@example.org for additional information.